What an OpenView Installer Does on Installation Day
Booked a visit and wondering how the day will go? Here's what an OpenView installer does from the moment the bakkie parks outside to the moment you're watching e.tv. We've written it for Stellenbosch homes, from student flats in Die Boord to farmhouses on the wine estates, so you know how long it takes and where you fit in.
Quick answer
On installation day an OpenView installer checks the view to the north-east, fixes the bracket and 80 to 85cm dish, runs and seals the cable, aligns the dish on a signal meter, sets up the decoder and helps you activate it. Most homes take a few hours. You only need to be there at the start and the end.
The day before: confirming the job
Good installation days start with a clear quote. We price the work before we drive out, so you'll already know what's included and what could change it. A photo of your roof, the TV wall and any old dish helps a lot. Our post on installation cost factors explains what we look at.
We'll also confirm the time, gate codes and whether there's a body corporate or estate rule about where dishes may go. Complexes in Brandwacht and Welgevonden often have these rules, and it's easier to know them before the drill comes out.
First 20 minutes: the OpenView installer walks the property
Before anything goes on the wall, your installer looks at the sky. OpenView comes from the Intelsat 20 satellite at 68.5 degrees East, so the dish must see north-east and fairly high with nothing in the way.
In Stellenbosch that's where most surprises hide. Old oaks along the street, the Simonsberg, Papegaaiberg or the slopes around Jonkershoek can block part of that line. The installer will stand where the dish might go and check it with an app or meter before choosing the spot.
Reusing an old dish
If there's already a DStv dish, it may work for OpenView because both use the same satellite position. The installer tests the dish, LNB and cable first. Reusing good parts keeps the cost down, but a rusted bracket or sun-cracked cable gets replaced.
Mounting the dish and running the cable
Next the bracket goes up. On a brick wall it's bolted with proper anchors. On a tiled or sheet roof the installer works from a ladder and seals any fixing so winter rain can't get in.
Then comes the cable route from dish to TV. A neat installer plans this with you, because it's the part you'll see every day. Cable is clipped along gutters or corners, sealed where it enters the house, and kept away from sharp bends that weaken the signal.
Safety first
Keep children and pets away from the ladder while we work, and please don't try to adjust the dish yourself after we leave. Roofs are slippery, especially on wet winter mornings, and it only takes one slip.
Need DStv installers in Stellenbosch?
Tell us what you need or what your screen is showing. We give you a clear price before we drive out.
Pointing the dish: why your OpenView installer uses a meter
This is the step that decides whether your picture holds up in a Cape storm. Phone apps point the dish roughly. A signal meter then lets the installer nudge it a millimetre at a time until quality peaks.
Signal quality matters more than strength. A dish with spare quality rides out heavy rain better, which is why we don't stop at "it works". For more on this, see our page on satellite dish alignment and our post on weather and signal loss.
Installation day at a glance
Every house is different, but this is roughly how a standard OpenView decoder and dish installation runs.
| Stage | What happens | Do we need you? |
|---|---|---|
| Arrival and walk-around | Sky check, dish spot, cable route agreed | Yes, to agree the plan |
| Bracket and dish | Wall or roof mount, dish fitted | No |
| Cable run | Cable clipped, sealed and brought inside | Only if we enter rooms |
| Alignment | Dish peaked on a signal meter | No |
| Decoder setup | Connected, scanned and activated | Yes, for activation |
| Handover | Channel test and remote walkthrough | Yes |
Decoder setup and activation with you
Back inside, the installer connects the decoder to the TV, runs first-time setup and lets it scan. Then it's activation, done online at openview.co.za, via WhatsApp or in the OpenView app with the decoder's details.
- Have the decoder box and slip ready, plus a phone with data.
- Watch the installer run the channel scan so you know how to repeat it.
- Complete activation together while the installer is still there.
- Flip through a few channels and check the picture on each TV point.
If you'd like the TV on the wall as well, our TV wall mounting service can be done on the same visit.
What affects the OpenView installation price on the day
At the time of writing, the decoder costs about R799 on openview.co.za, with retail specials from around R599, and a decoder with an installation voucher sells for around R1,699. Your own OpenView installation price can shift if the walk-around turns up something new.
- A longer cable run, common on estates and in Idas Valley homes set back from the road
- A pole mount when oaks or mountains block the wall
- An extra TV point in a second room
- Replacing a rusted bracket or damaged LNB on an old dish
Any change is agreed with you before we carry on. Our OpenView decoder price guide covers the box itself, and you can ask our team for a current quote at any time.
Technician tip
Student flats near the university often share one roof. Ask the landlord or body corporate first, because a shared communal system may already be on the roof. Our complex installations team can check it.
Book your OpenView installer in Stellenbosch
Our accredited team handles full OpenView installation across Stellenbosch, Paradyskloof, Uniepark and Cloetesville, alongside our work as DStv installers in Stellenbosch. We often get out the same or next day, depending on the schedule.
Call or WhatsApp 072 237 6363, or book a visit online. Send a photo of your roof and TV wall, and we'll quote before we come.
OpenView installer: FAQs
How long does an OpenView installer take?
A standard install on a house with a clear view usually takes a few hours. Long cable runs, pole mounts or extra TV points add time. We'll give you a rough idea when we quote, so you can plan your day.
Do I need to be home when the OpenView installer arrives?
It helps to be there at the start, to agree the dish spot and cable route, and at the end for activation and the channel test. In between, you can carry on with your day while we work outside.
What does an OpenView installer in Stellenbosch need from me?
Clear access to the wall or roof, a free plug point near the TV, the decoder and its box, and a phone with data for activation. If you live in a complex or estate in Stellenbosch, check the dish rules beforehand.
Does OpenView need a dish?
Yes. OpenView is satellite TV, so it needs a dish of around 80 to 85cm pointed at the satellite, plus an LNB and cable. An existing DStv dish can often be reused after it's been tested.
How much is OpenView decoder and installation?
At the time of writing, a decoder with an installation voucher sells for around R1,699, and the decoder alone is about R799 online. Your final cost depends on the dish spot and cable length, so ask our team for a current quote.
Talk to our Stellenbosch team
Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.