Home › Blog › Multi-room Viewing
Extra View Installation in Stellenbosch: Steps, Costs, Tips

The rugby is on in the lounge, someone wants a series in the main bedroom, and the student renting your granny flat in Die Boord has given up asking. That is usually when an extra view installation comes up. This post walks you through what our team actually does on the day in Stellenbosch, what it costs each month and which decoders can work together.
Quick answer
An extra view installation links two or three DStv decoders in one home on one subscription, so each TV can watch a different channel. You pay your package plus one Access Fee of R125 a month at the time of writing (nothing extra if one decoder is already an Explora). In Stellenbosch the job usually takes a few hours, and we quote first.
What an extra view installation gives your Stellenbosch home
XtraView is DStv's name for linking decoders. One decoder is the primary and the other is the secondary. They share one smartcard account, but each box has its own tuner, so the lounge and the bedroom can watch completely different things at the same time.
People often search for DStv Extra View or "dual view" and mean slightly different things. Here is the plain difference:
- Dual view was an older single decoder with two outputs. It is not what we install today.
- DStv XtraView uses two or three separate decoders, each with its own remote, linked on one account.
- A second subscription means a whole new account. It costs far more and only makes sense for a separate household, like a rented cottage with its own tenant.
If you want the long version of how linking works, our earlier post on sharing one subscription across two TVs covers the background. This article stays focused on the practical side: the day itself, the money and what can go wrong.
Before the day: DStv XtraView decoder combinations that work
Most of the planning happens on the phone or WhatsApp. We ask what decoders you already own, where each TV lives, and whether your dish already has a Smart LNB. Those three answers shape the whole extra view installation.
| Decoder pair | Works in XtraView? | What to know |
|---|---|---|
| Explora + HD single view | Yes | The most common setup. The Explora already carries the Access Fee, so no extra monthly cost. |
| Explora Ultra + Explora | Yes | Two recording decoders. Great for families who record a lot. |
| Two HD single view decoders | Yes | Cheapest hardware route, but you add one Access Fee each month. |
| Three decoders | Yes | Package plus two Access Fees. Needs careful cabling from the dish. |
| Very old SD decoders | Check first | Some older boxes are no longer supported. Send us the model number. |
Those DStv XtraView decoder combinations are the ones we see most in Stellenbosch homes. If you still need to buy a second box, our comparison of the decoder price at Pep versus a fully installed decoder shows why the shelf price is rarely the whole story.
Good to know
Explora and Explora Ultra decoders need a Smart LNB on the dish because they use several tuners at once. If your dish in Uniepark or Paradyskloof still has an old twin LNB, budget for a Smart LNB swap as part of the job.

The day of your extra view installation, step by step
Here is how a typical visit runs. Times vary with the house, but the order rarely changes.
- Walk-through. We look at both TV spots, the roof and the existing dish, then agree on the cable route with you before drilling anything.
- Dish and LNB check. We test the dish on a signal meter. If needed, we fit a Smart LNB or a multiswitch so each decoder gets its own clean feed.
- Cable run. New coaxial cable goes from the roof space or outside wall to the second room, through a wall plate where possible.
- Linking the decoders. We set one decoder as primary and one as secondary, then connect them so the heartbeat signal can pass.
- Activation. The secondary decoder is added to your account through DStv, and both boxes are authorised.
- Testing with you. Two different channels play at once, recordings work, and you check the remotes before we pack up.
Older homes near the town centre often have thick walls, so the cable route takes the most thought. In newer Welgevonden and Brandwacht houses, there is usually roof access and the run is quicker. Either way, every extra view installation we do ends with a tidy cable and a test you watch yourself.
Safety first
Please do not climb onto a wet roof to "help" with cabling. Stellenbosch winter rain makes tiles and IBR sheeting slippery, and roof spaces can hide old wiring. Leave ladders and the roof to the technician.

Extra view installation cost in Stellenbosch, once off and monthly
There are two kinds of cost: what you pay once for the job, and what changes on your monthly debit order.
The once-off part
For a standard DStv job we usually budget about R850 to R1,400. Linking decoders often lands nearer the higher bracket, roughly R1,500 to R2,400, when a Smart LNB, a multiswitch or a long cable run is involved. The decoder itself is bought separately. We quote first, so you know the number before we drive out.
The monthly part
- Your normal package price stays the same.
- Two decoders linked: add one Access Fee, R125 a month at the time of writing.
- If one decoder is an Explora or Explora Ultra, you already pay that fee, so the second box adds nothing.
- Three decoders: package plus two Access Fees.
So a Premium household with an Explora pays the same each month after an extra view installation as before. Our guide to the DStv Premium price for 2026 breaks down the contract and month-to-month options if you are weighing up an upgrade at the same time.
Need DStv installers in Stellenbosch?
Tell us what you need or what your screen is showing. We give you a clear price before we drive out.
Heartbeat and linking errors after DStv Extra View is set up
Linked decoders keep checking in with each other. According to DStv's XtraView help page, the primary decoder sends a "heartbeat" to the secondary. If that contact drops, the secondary shows a linking error and stops playing channels.
Common causes we find in Stellenbosch homes:
- Someone unplugged the primary decoder to save power, or it went off during load shedding and did not come back on.
- A cable or connector was knocked loose when furniture moved.
- A cheap splitter was added later that blocks the linking signal.
- The primary decoder was moved to another house, which is not allowed in XtraView.
Technician tip
Switch the primary decoder on first, wait a minute, then switch on the secondary. Most heartbeat errors after a power cut clear this way. If it still shows an error after ten minutes, call us before you start swapping cables.
Good wiring on the day prevents most of these problems. That is why we label the primary decoder during every extra view installation, so the family knows which box must stay on.

DStv XtraView or streaming on the second TV?
Many homes in Technopark and Jamestown now have fibre, so a fair question is whether the second room even needs a decoder. Here is our honest view.
- XtraView gives you full live TV in both rooms off the dish. It keeps working when the internet is down, which matters during load shedding when routers switch off.
- Streaming on a smart TV through the DStv app works without extra cabling, but it depends on your internet speed and does not always carry every channel or sport.
- Families with sport fans usually prefer a linked decoder, because a big match on a weak connection is no fun.
If your second TV is used now and then, streaming may be enough. If it is used every evening, an extra view installation is usually the calmer choice.
Bigger homes, cottages and student lets in Stellenbosch
Stellenbosch has a lot of mixed properties: a main house with a garden flat, a family home with a student lodger, or a guesthouse on a wine estate. XtraView only covers decoders in one household, so a tenant with their own account needs their own subscription.
For guesthouses, bars and residences with many TVs, linking decoders is the wrong tool. Those jobs need a proper distribution system and the right business account, which we explain in our guide to commercial DStv installation for Stellenbosch guesthouses and bars.
For a normal family home in Idas Valley or Brandwacht, though, linking decoders is still the simplest way to stop the remote-control arguments. If you are starting from scratch with no dish at all, our team handles the full DStv installation in Stellenbosch and the linking in one visit.

Planning your extra view installation in Stellenbosch
A quick checklist before you message us:
- Model numbers of the decoders you own (on a sticker underneath).
- Which rooms the TVs are in, and roughly how far apart.
- A photo of the dish and LNB if you can take one safely from the ground.
- Whether your account is paid up and active.
With those details we can tell you which parts you need and give an honest quote. Our XtraView setup service covers the linking, cabling and activation, and our Explora installation team can fit the Smart LNB and set up recordings on the same day.
Book an extra view installation with our Stellenbosch team
We work across Stellenbosch, from Kayamandi and Cloetesville to Paradyskloof and the estates outside town. Visits are often the same or next day, depending on the schedule. Send the details above through our Stellenbosch contact page and we will come back with a quote and a time that suits you.
extra view installation in Stellenbosch: FAQs
How much is extra view installation in Stellenbosch?
Most extra view installation jobs in Stellenbosch fall between about R850 and R2,400, depending on whether you need a Smart LNB, a multiswitch or a long cable run. The decoder is bought separately. We quote first, so you know the price before we drive out, and the monthly cost is one Access Fee of R125 at the time of writing.
Can I do an extra view installation myself?
You can if you are comfortable with roof work, coaxial cabling and linking menus, but most people get stuck on the cabling and the heartbeat connection. A wrong splitter or a missing Smart LNB is the usual cause of linking errors. A technician also tests both decoders on a meter, which is hard to do properly at home.
Which decoders can be used for DStv Extra View?
Current HD single view decoders, the Explora and the Explora Ultra can all be linked in XtraView, in pairs or as a group of three. Some very old standard definition decoders are no longer supported. Check the model number on the sticker under each decoder and send it to us before booking.
Do I need a new dish for extra view installation?
Usually not. Most existing dishes can feed two or three decoders once the LNB is right. If you use an Explora, the dish needs a Smart LNB, and for three decoders a multiswitch may be added. We test the dish signal first and only replace parts that are faulty or unsuitable.
Can my XtraView decoder be used at another house in Stellenbosch?
No. Linked decoders must stay in the same home because the secondary decoder needs the heartbeat from the primary decoder. If a family member or tenant moves out, the second decoder needs its own subscription at the new address. Unlinking it from your account stops the Access Fee too.
Why does my second decoder say it is not linked?
The secondary decoder has lost contact with the primary one. Check that the primary decoder is switched on and not in standby after a power cut, then restart both, primary first. If the message stays, a cable, connector or splitter between them is the likely cause and needs testing.
Talk to our Stellenbosch team
Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.